Tanker Semitrailer

  • Diesel / Gasoline Tank Semitrailer

    Diesel / Gasoline Tank Semitrailer

    The fuel tank made of aluminum alloy, is about 40% lighter than carbon steel at the same volume, which makes the vehicle’s center of gravity low, not easy to roll over, and has good driving safety; aluminum alloy has good electrical conductivity and is not easy to accumulate static-electricity. When the vehicle collides or rolls over, no sparks will be generated; the aluminum alloy outer surface has a dense oxide layer protective film, which will not rust, so it will not pollute the oil, which can ensure the quality of the oil during transportation; due to its own light weight, the tank can increase loading capacity, reduce transportation times, improve transportation efficiency, reduce fuel consumption and emissions; aluminum alloy materials can be recycled and reused for many times , and it will not effect the mechanical properties of aluminum alloy body . 

  • 40,000 L Aluminum Fuel Tank Semi-trailer

    40,000 L Aluminum Fuel Tank Semi-trailer

    This aluminum tank semi-trailer is especially designed for liquid transportation .The capacity can be customized .
    • Carrying for fuel, petrolum, crude oil, Diesel, Gasoline Fuel, asphalt, chemicals, corrosives, petro-chemicals, liquid fertilizer, caustic soda, concentrated sulfuric acid, etc. 
    • The inside of tank body is corrosion-proof treated to meet the transport demands for different kinds of liquid foods and chemical liquids. 

  • 50,000 L  Carbon steel Fuel Tanker Semitrailer for diesel and gasoline

    50,000 L Carbon steel Fuel Tanker Semitrailer for diesel and gasoline

    1, Our tank is equipped with multi-channel anti-wave partitions, and can be divided into several compartments and load different liquid. And can be achieved the pump into, pump out through the table, and pump into, pump out not the table, self-flow through table, and not but table.
    2. We test all of our fuel tank trailer.We use of high-pressure gas leak detection, the tank has a high strength, the center of gravity stability, vehicle safety and stability characteristics.
    3. All kinds of alcohol, sulfuric acid, salted chemical tanker use imported stainless steel (thickness of 4mm-5mm) or plastic cans (polypropylene) (thickness of 12mm-22mm) manufacturing.
    4. Our fuel tank is composed of a power take-off device, a drive shaft, a gear oil pump, a tank body and a pipe network system. Pipe network system consists of oil pump, three-way four-ball valve, two-way ball valve, filter, pipe composition.
    5. Gear pump, centrifugal pump, heavy oil pump, stainless steel pump are available and can be installed heating pipe and insulation layer.

  • 35,000 L ~ 55,000 L Stainless Steel Milk Tanker Trailer — Food Grade Tanker Trailer

    35,000 L ~ 55,000 L Stainless Steel Milk Tanker Trailer — Food Grade Tanker Trailer

    The tank body is made of food-grade stainless steel. The outside of the tank body needs to be insulated to prevent the deterioration of fresh milk. ,adding a CIP (cleaning device) to each milk tanker . The outside of the tank is finely polished and the tank is equipped with thermal insulation and refrigeration functions.

  • Full trailer Tanker

    Full trailer Tanker

    The twin pack tanker which also called full tanker trailer , is composed of double tanker body .

    It is widely used for air port fuel storage or gasoline / diesel station transportation . The loading capacity can be customized according to local laws and regulation .

    Its loading capacity ranges from 8,000 L to 25,000 L .

    We support complete set order with manufacturing the front tanker truck together with the rear tanker as well as the isolated for each . 

    Full trailer tanker material can be carbon steel , stainless steel , aluminum . 

    Same function with the front tanker . 

     

  • Bulk Cement Semitrailer

    Bulk Cement Semitrailer

    The Bulk Cement Semitraier is applied for the powder transportation and air pressure discharging of dry materials such as fly ash, cement, lime powder and ore powder with a particle diameter of not more than 0.1mm. When the vertical height of the unloading reaches 15 meters, the horizontal conveying distance can reach 5 meters.

    The semi-hanging powder material transport vehicle uses its own engine power to drive the vehicle-mounted air compressor through a power take-off, and sends compressed air through a pipeline into the air chamber at the lower part of the sealed tank, so that the cement on the fluidized bed is suspended into a fluid status. When the pressure in the tank reaches the rated limit, the discharge butterfly valve will be open, and the fluidized cement will flow through the pipeline for output.

     

  • 75 m³ Cement Powder Tank Semi-Trailer

    75 m³ Cement Powder Tank Semi-Trailer

    75 Cubic Meter tank for loading with cement powder requires very qualifed tank material as well as the technology on the production line .

    Due to its high pressure from the inner tank , the product itself must be used with qualified raw material and steel from the famous domenstic factory .

    Besides , such big volume tank also requires good compressor as well as powerful engine to discharge the cement powder in the tank slowly and regularly .

    We export such big tank to Pakistan country most often . 

     

     

  • 32 m³ Cement Bulker

    32 m³ Cement Bulker

    As professional semitrailer manufacturer , we produce different sizes cement powder trailer for clients need . 

    This product has 32 m³ capacity loading , payload is 39 tons ,with 2 axles .

    Such product are very popluar in the south Asia countries , such as Philippines , Vietnam , Cambodia . 

    The 2 axle cement powder semitrailer is more flexible when driving ,  and less cost on daily maintenance  .

    It is a money-making tool for the owner .   

     

  • LPG Tanker Semitrailer

    LPG Tanker Semitrailer

    LPG is one of petroleum products , the abbreviation of Liquefied Petroleum Gas .

    It is a colorless and volatile gas produced from oil and gas field mining, oil refineries and ethylene plants. It is mainly used in industries such as automobiles, city gas, non-ferrous metal smelting and metal cutting. 

    The main components of LPG are propane and butane, with a small amount of olefins. LPG is stored in a storage tank in a liquid state under appropriate pressure, and is often used as a cooking fuel, which is the liquefied gas we often use.

    Oriental Vehicles International Co.,Limited has abundant and rich experience in designing and fabricating of LPG semi-trailers from 25 m³ to 75 m³ , to meet with European and American international standards .

  • Concrete Mixer Semitrailer

    Concrete Mixer Semitrailer

    1. CNC laser cutting, with small error and high precision; The core components of the hydraulic system (variable plunger pump, quantitative plunger motor, reducer) all adopt well-known brands, with stable transmission and reliable performance.

    2. The tank body adopts central axis positioning fixture for group welding, which effectively guarantees the coaxiality and roundness of different cone sections;

    3. Key processes such as the welding seam of the butt joint of the tank body adopt digital automatic welding, with high production efficiency, good welding seam forming and high quality;

    4. The tank body and parts are subjected to sandblasting treatment to eliminate oil stains and rust on the surface of the parts, creating for spray paint good conditions;

    5. Using primer, halfway, topcoat, and color bar “four sprays and four bakes” spraying process, the paint is bright in color, durable, and customized patterns to meet the different needs of customers;

    6. The vehicle assembly process design is reasonable, the quality control system is rigorous and orderly, and the manufacturing of high-quality products provides a guarantee to the clients .

Send your message to us:

Write your message here and send it to us